Solar or storage – single controller
DEIF controllers can be used to quickly and flexibly add a power source to an existing plant, creating a hybrid solution without integrating the DEIF controller with a 3rd party power or energy management system (PMS/EMS) or other control solution.
The DEIF controllers can be configured to send or receive external signals, for example setting up an ASC-4 Solar Single controller to limit or maximise solar production based on load and power measurements received from external meters, or setting up an ASC-4 Battery Single controller to send start or stop signals to an external genset controller depending on the state of charge of the energy storage system (ESS). The DEIF ASC-4 Solar Single controller can maximise sustainable power penetration and is compatible with sky imager solutions and weather stations, and all controllers can be configured to run in standard operating modes such as mains power export (MPE), peak shaving, and fixed power.
Saving fuel in existing plants
Integrating a DEIF ASC-4 Solar or Battery Single controller in an existing plant is an efficient way of lowering fuel consumption. Adding a PV panel contributes solar power that reduces the need for genset fuel, while adding an ESS helps you operate your gensets more efficiently at their optimal duty point, lowering fuel consumption. For example, if your genset is running at 40% load, your ESS can demand charging power, raising the genset load to 70%. Conversely, if the genset is running at a high 95% load, the ESS can discharge power, supporting the genset so its load drops to the optimal 70%.
Many ESS options
Adding an ESS gives you many other design options. Like a genset, it can provide spinning reserve functionality to ensure uptime, and it can be configured to ensure optimal genset load. You can use energy source or power source control, and the ESS can run in grid-forming, grid-following, or droop mode (acting as a virtual synchronous generator). You can base charging/discharging on schedular command timers and set up the ESS to communicate with a BCU, BMS, or PCS over Modbus.
Click on the green dots to learn more about our products
ASC 150 Storage
The ASC 150 Storage provides effective, flexible, and scalable energy storage system (ESS) control with a wide range of options for greenfield and brownfield hybrid power applications.
It can be used on its own for ESS/hybrid rental or integrated in third-party plant control solutions or a DEIF power management system.
The controller optimises the battery power, to save fuel and maximise green penetration.
ASC 4 Battery
The ASC-4 Battery lets you quickly and easily add energy storage systems (ESS) such as batteries in greenfield hybrid applications with other DEIF controllers, providing seamless energy storage in commercial and industrial applications.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
Onsite & consultancy services
Need help installing, commissioning, or repairing DEIF equipment, or consultancy services to complement your in-house skills? Our network of Service Centres and expert back-office staff are ready to support you – wherever you are, and whatever you need.
Find more knowledge
Get industry insights and fresh inspiration from DEIF – free of charge!
Support
Complete product support
We help you keep your assets running reliably and efficiently with support services such as software updates, repair services, a solutions knowledge base, and a full range of spare parts throughout the product lifecycle – and much more, all over the world.
Find more knowledge
Get industry insights and fresh inspiration from DEIF – free of charge!
Detailed documentation
Make the most of the features of your equipment, now and in future, with relevant, detailed, and up to date documentation for all DEIF products. It’s all available on our website – from operator manuals and installation instructions to data sheets and certifications.
Find more knowledge
Get industry insights and fresh inspiration from DEIF – free of charge!
Hands-on product training
Unleash the full potential of your DEIF products with our hands-on operator and technician training. Sessions are carried out in a risk-free environment at DEIF premises, teaching you how to make efficient use of our products with zero risk of damage to your systems.
Find more knowledge
Get industry insights and fresh inspiration from DEIF – free of charge!
Instruments and switchboard accessories
DEIF offers a wide range of analogue meters, transducers, multi-instruments and hour-counters. The product range also comprises various current transformers for standard AC measurement and AC protection.
Ideal for rental applications
This application type is ideally suited for battery rental applications where an ASC-4 Battery Single controller is mounted on your rental assets and can quickly be deployed in green power rental applications (delivering a fully charged ESS on site and quickly hooking it up to consumers).
You can set up schedular timers in the controller that adjust operation to match load and site requirements. For example, if noise and exhaust emissions are not permissible during particular periods, such as in residential areas at night, the controller can stop all connected gensets during this period. When site noise is permissible, the controller can send genset start signals as required to deliver the power needed (from the ESS or gensets, or by combining them). You can also configure the controller to send start/stop signals depending on the load.
- Solar or storage integration in hybrid applications
- Wide range of possibilities with ASC-4 Single controller
- Standard operating modes such as mains power export (MPE), peak shaving, and fixed power
- Built-in power metering
- Highly customisable with user-friendly M-Logic tool
Click on the green dots to learn more about our products
ASC 150 Solar
The ASC 150 Solar provides effective, flexible, and scalable photovoltaic (PV) inverter control with a wide range of options for greenfield and brownfield hybrid power applications.
ASC-4 Solar
Ideally suited for greenfield hybrid power plants, the ASC-4 Solar controller can interface with other DEIF controllers and a wide range of PV inverters, enabling you to integrate solar power in greenfield applications and maximise sustainable power penetration.
Onsite & consultancy services
Need help installing, commissioning, or repairing DEIF equipment, or consultancy services to complement your in-house skills? Our network of Service Centres and expert back-office staff are ready to support you – wherever you are, and whatever you need.
Find more knowledge
Get industry insights and fresh inspiration from DEIF – free of charge!
Support
Complete product support
We help you keep your assets running reliably and efficiently with support services such as software updates, repair services, a solutions knowledge base, and a full range of spare parts throughout the product lifecycle – and much more, all over the world.
Find more knowledge
Get industry insights and fresh inspiration from DEIF – free of charge!
Detailed documentation
Make the most of the features of your equipment, now and in future, with relevant, detailed, and up to date documentation for all DEIF products. It’s all available on our website – from operator manuals and installation instructions to data sheets and certifications.
Find more knowledge
Get industry insights and fresh inspiration from DEIF – free of charge!
Hands-on product training
Unleash the full potential of your DEIF products with our hands-on operator and technician training. Sessions are carried out in a risk-free environment at DEIF premises, teaching you how to make efficient use of our products with zero risk of damage to your systems.
Find more knowledge
Get industry insights and fresh inspiration from DEIF – free of charge!
Instruments and switchboard accessories
DEIF offers a wide range of analogue meters, transducers, multi-instruments and hour-counters. The product range also comprises various current transformers for standard AC measurement and AC protection.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
MTR-4
Efficient, fast and flexible, the programmable MTR 4 transducer offers the same performance as up to four standard transducers, measuring and calculating AC voltage, AC current, active/reactive apparent power, power factor, frequency, kWh, kvar, THD, dynamic and maximum demands.
MIB 8000
DEIF's MIB 8000 multi-instrument for measurements and monitoring of single-phase or 3-phase electric energy distribution networks cover readings of more than 50 parameters.
Read our hybrid application guide
Short lead times and timely delivery
Our extensive manufacturing capacity allows us to meet any volume demand – regardless of geographical destination. We work hard to make sure our customers receive orders as quickly as possible, and we ship standard products in less than 7 days.
We manufacture all our products in-house at our Danish HQ in Skive to ensure we continue to meet demand and reduce customer lead times. So if you are struggling to get hold of control products through your usual supply channels, there has never been a better time to talk to DEIF.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
发电机组控制器 AGC-4 Mk II
- 市网失电自启动(AMF)时序
- 多主站功率管理
- 基础功率管理 (支持32台机)
- 扩展功率管理(超过32台机)
- RMB变压器远程维护支持32台机
- PLC逻辑编程
- 发动机CAN总线
- 导轨安装
- 灵活的硬件
- 基于CAN总线的附加输入/输出模块(9个CIO)
- 冗余控制器
- 功率管理的冗余CAN总线
- N+X功能
- 先合闸后励磁/6秒内启动备用电源
- 支持DEIF数字调压器DVC 550
- 多用途PID调节
- 支持电网规范VDE AR-N 4110/4105(德国中压), VDE AR-N 4105(德国低压), EN 50549-1:2019(欧洲), ENA EREC G99(英国)
- 支持触摸屏配套 (如TDU107)
- 支持Tier 4 终极第5阶段
- 仿真以简化培训和工厂调试
- 混动电源管理
- 重载 (通过ALC-4)
- 燃油优化
- 完全兼容AGC 150和ASC-4
- 通过UL认证，正在进行TÜV认证
高级控制器 AGC 150 混动控制器
- Minimum Genset load
- Load calculation in terms of solar power
- Genset start/stop based on mains import/export
- Genset start/stop based on PV production
- PV included in mode: MPE Mains Power export/import
- PV included in mode: LTO Load Take over
- PV included in mode: Fixed Power
- PV included in mode: AMF Automatic Mains Failure
- PV included in mode: Peak Shaving
