TDU 115 Extended

您即将下载 TDU 115 Extended

您已选择下载我们的软件。

几秒钟内,您将收到一封包含下载链接的电子邮件。

如果使用软件有问题,请联系support@deif.cn.

诚挚的祝福,

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

本软件适用于以下DEIF产品

您即将下载 1.4.2.1

与上一版本相比,主要更新如下:

Corrections

  • Fixed issue with home page application drawing becoming zoomed out with every power cycle or reboot from TDU restart.
  • Fixed issue with TDU not connecting with AGC-4 Mk II application software version 6.14.0.
  • Fixed show/hide of page 2-3 in home.
  • Resolved issue with inhibit start button, inhibit stop button, inhibit GB/TB button and inhibit MB button commands.
版本号 发布日期 描述

1.4.2.1

14/10/2024

Corrections

  • Fixed issue with home page application drawing becoming zoomed out with every power cycle or reboot from TDU restart.
  • Fixed issue with TDU not connecting with AGC-4 Mk II application software version 6.14.0.
  • Fixed show/hide of page 2-3 in home.
  • Resolved issue with inhibit start button, inhibit stop button, inhibit GB/TB button and inhibit MB button commands.

1.4.2.0

11/06/2024

New features

   1- Confirm action pop-ups.

 

Changes

   1- New method for handling translations.
   2- Tier 4 jump improvements.

 

Corrections

   1- Fixed issue with parameter dialogue not showing the correct state of the toggle switches.

1.4.1.0

04/01/2024

New features

  • Support for ASC-150
  • Support for ASC-4

Corrections

  • Fixed misalignment of busbar in supervision when switching between large and small view.

1.4.0.0

26/10/2023

New features

      • Supervision variant for TDU.

Changes

      • Extended capability to read more VTA's.

Corrections

      • Fixed issue with TDU not being able to connect to AGC-4 Mk II v6.08.0.
        Fixed issue with TDU not being able to connect to AGC-4 Mk II BTB.

 

1.3.12.0

25/08/2023

New features

    • Supervision shows ASC controllers.

Changes

    • Added support for Volvo EMS.

Corrections

    • Fixed TDU 107 supervision issue.

1.3.11.1

20/06/2023

Changes

  • Fixed missing application supervision when there is a BTB controller in the application drawing.

1.3.11.0

05/03/2023

New features

  • Added support for FPT stage V engines.

Changes

  • Created separate pages for "Engine lamps" and "Exhaust aftertreatment".
  • Added support for tree view translations.
  • Made opening parameters more intuitive.
  • Added limits to the meters in TDU 110 and TDU 115.

1.3.10.1

07/10/2022

Corrections:

1- Fixed horizontal scrolling of Supervision.
2- Fixed missing "None" option in "Instrument Selection".
3- Fixed missing Custom Logo in "Log" and "Controller settings" pages.
4- Reset index when changing between "Controller settings" lists.

1.3.10.0

15/07/2022

Changes:

  • Custom logo and topbar branding.
  • Custom branding configuration import/export.

Corrections:

  • Fixed issue with negative values in alarm and event log.
  • Fixed issue with controller communication lost for 1-2 sec every 13 or 25 minutes.
  • Fixed issue with TDU not able to connect to AGC-4 mkII Mains unit.

1.3.9.1

18/02/2022

Changes:

  • Only show measurements supported by the connected ECU.

Corrections:

  • Fixed issue with writing alarm settings for parameters

在此页面,您可以下载产品的更新软件,并使用各种实用工具和附加组件设置、检测故障和配置产品。

请注意,用户无法更新我们的所有产品。同时也不是所有产品都配有实用工具。因此,本页的软件列表不能视为DEIF产品的概述。

DEIF将登记您注册的下载邮箱地址,以便在未来需要时发送有关的更新信息。

DEIF不对产品更新失败或使用实用工具造成的任何后果负责。DEIF A/S也不对软件升级导致的产品行为变化的后果负责。用户始终有责任在调试前确保正确的设置和配置。请在更新产品之前查阅软件的更新日志。

www.deif.cn软件下载许可协议

下载的软件仍是DEIF的财产。本软件不得用于商业目的分发, 不得全部或部分更改或重复使用,也不得出售给任何第三方。

最新版本,功能齐全

我们始终建议您安装最新版本的软件,以充分利用您的DEIF产品。

所有更新的软件都可以从www.deif.cn->支持->下载->软件栏目下下载。

如果您在查找产品的相关软件时有任何疑问或问题,请随时致电丹控电气(上海)有限公司,电话: +86 21 68796200,或者发送电子邮件至support@deif.cn, 我们随时为您服务。