TDU 107 Core

您即将下载 TDU 107 Core

您已选择下载我们的软件。

几秒钟内,您将收到一封包含下载链接的电子邮件。

如果使用软件有问题,请联系support@deif.cn.

诚挚的祝福,

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

本软件适用于以下DEIF产品

您即将下载 1.3.10.0

与上一版本相比,主要更新如下:

Changes:

  • Logo and top bar branding.
  • Branding configuration import and export.

Corrections:

  • Fixed glitch with negative values in alarm and event log.
  • Fixed glitch with controller communication lost for 1-2 seconds every 13 or 25 minutes.
  • Fixed glitch with TDU not able to connect to AGC-4 Mk II Mains controller.s for parameters
版本号 发布日期 描述

1.3.10.0

13/07/2022

Changes:

  • Logo and top bar branding.
  • Branding configuration import and export.

Corrections:

  • Fixed glitch with negative values in alarm and event log.
  • Fixed glitch with controller communication lost for 1-2 seconds every 13 or 25 minutes.
  • Fixed glitch with TDU not able to connect to AGC-4 Mk II Mains controller.s for parameters

1.3.9.1

17/02/2022

Changes:

  • Only show measurements supported by the connected ECU.

Corrections:

  • Fixed issue with writing alarm settings for parameters

1.3.9.0

12/01/2022

Changes:

  • New application select page added to the setup menu.

Corrections:

  • Toggle switches are more accurate now.
  • Fixed language export issue with empty AOP labels.
  • Fixed missing semi button when activating the German AUS mode.

1.3.8.0

09/12/2021

Changes:

  • Added option to hide application and nominal settings on instrument pages.
  • New and updated customer branding.

Corrections:

  • IP can't be changed when disabling Master/slave when TDU is connected to slave.

1.3.7.0

31/05/2021

New features:

  • Support for OEM product IDs in AGC-4 Mk II is added.
  • Scania EMS S8 support is added..
  • Block mode button is added.
  • Master/slave controller manual switch is added.

Changes:

  • "AUS" mode for German option V0108 in "Auto" and "Test" mode is added.

Corrections:

  • Alarms are removed from the header when alarm conditions disappear.
  • Fixed an issue with missing genset modes in the language file.
  • Fixed that the genset mode would change if the password level was set to service or master.

1.3.6.0

23/03/2021

New features:

  • Added support for OEM product IDs in AGC-4 Mk II.
  • Extra safety pop up (Nominal setting + Plant mode).
  • Translation file added with "TDU specific texts".
  • "UpdatePackage.zip" includes software version.
  • Support updatepackage.zip with lower case characters.

1.3.5.0

29/01/2021

New features:

  • Added support for AGC-4 Mk II
  • Added Customer branding

1.3.4.0

07/12/2020

Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

Corrections:

  • Customer branding is added.
  • Fixed the missing alarm texts for EIC alarms.
  • Fixed the screen lock on the Log page, when updating logs from an empty list.

1-3-3-0

10/09/2020

Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

New features:

  •    Further brandings are added.
  •    AGC-4 as clock master is added.

Changes:

  •    New entry point for the ECU measurement window is added.

Corrections:

  •    Parameter max. value was not taken into account for text values.
  •    If exactly 9 alarms was present, the last one was not visible.
  •    Possibility to include system information when exporting a TDU.config file is added.
  •    Generator measurements are removed from mains TDU.
  •    Regeneration parameters are added to TDU.
  •    Application supervision now supports mains with ID 1-16 and DG´s with ID 17-32.

1.3.1.0

19/02/2020

Supported on AGC-4 DG & AGC-4 Mains.
AGC-4 SW required: 4.76.1.

New features:

  •    Control panel instruments can now be custom scaled by pressing and holding 3 seconds.
  •    All voltage selections in parameter 9030 are now supported.
  •    Access lock is implemented, when the input are configured.
  •    New screen is added with current measurements shown graphically.
  •    M-Logic command "Inhibit. mode button" is now reflected in TDU.
  •    It is now possible to add a separate password for control panel instruments under "Permissions".
  •    Fuel level is now shown in the top bar, if parameter 10980, 10990 or 11000 is set to "RMI fuel level" via the utility software.
  •    Running hours is now shown in the top bar, if connected to a genset controller.
  •    Parameter shortcut is added on the control page; it can be enabled/disabled under "Display settings".
  •    Power Management ID and priority are added to the control panel, when connected to a genset controller.
  •    Auto Jump to Synchroscope page is added; it can be enabled/disabled under "Display settings".
  •    Import/Export: It is now possible to load a configuration file from an older software version.

Changes:

  •    20 pages are now available in the instrument panels on the control page.
  •    Lists of instrument measurements have been expanded.
  •    User access level filtering on the parameter page have been removed.
  •    DM1/DM2 texts have been expanded.
  •    When connected to a German AGC-4 with V0108 option, the manual button is removed.

Corrections:

  •    Language management create export has been corrected, when specific German charecters are used in the controller translation.
  •    Visibility of the DM1 top icon has been corrected.

1.3.0.1

23/09/2019

Only supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.

Corrections:

  • Corrected: AOP shortcut on control panel page.
  • When changing mode, the confirmation dialogue now always pops up.

1.3.0.0

12/09/2019

Supports AGC-4 DG & AGC-4 Mains controllers.
Minimum AGC-4 SW required: 4.74.3.

New features:

  • Support of AGC-4 mains controller.
  • Import/export of following settings via USB:
            - Meters on homepage
            - Password levels
            - AOP texts
            - All settings under "Display config" 
  • Added "Connection to controller" text on start-up screen.

Changes:

  •    TDU backlight timeout introduced.
  •    Fixed sporadic communication timeout messages on TDU.
  •    Extended number of status texts on the TDU.

Corrections:

  • Fixed screensaver freeze issue.
  • Corrections to some status texts.
  • Fixed rare initial communication issues.
  • Create new master language function corrected

1.2.2.0

19/06/2019

Only supported on AGC-4 DG.
Minimum AGC-4 SW required: 4.72.0.

New features:

  • Implementation of offline USB update of TDU
  • Added scrolling on supervision page
  • Added hardcoded master password to DM1/DM2 clear button
  • Enhanced user feedback during restart of TDU
  • Added new EasyConnect text: "DG Ready to be added"

Changes:

  • Improved connection stability between TDU and AGC-4 controller
  • Change scaling of Fuel rate measurement
  • Internal production handling updated.

Corrections:

  • Correct Modbus offset for escape mode timer
  • Improved stability of auto connect feature
  • Added missing password prompt to AOP shortcut on home screen
  • Fixed misplaced buttons in control panel

1-3-3-1

Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

Changes:

  • Extended search for renamed software packages is added. This means that for releases after 1.3.3.1 the TDU software package will include the version number. 

Corrections:

  • Fixed connection problems in firmware ver. 1.3.3.0.
  • Fixed DVC types on the parameter page.
  • Fixed problems with parameter scaling and drop-down elements on the parameter page and in the USW dialogue.

 

在此页面,您可以下载产品的更新软件,并使用各种实用工具和附加组件设置、检测故障和配置产品。

请注意,用户无法更新我们的所有产品。同时也不是所有产品都配有实用工具。因此,本页的软件列表不能视为DEIF产品的概述。

DEIF将登记您注册的下载邮箱地址,以便在未来需要时发送有关的更新信息。

DEIF不对产品更新失败或使用实用工具造成的任何后果负责。DEIF A/S也不对软件升级导致的产品行为变化的后果负责。用户始终有责任在调试前确保正确的设置和配置。请在更新产品之前查阅软件的更新日志。

www.deif.cn软件下载许可协议

下载的软件仍是DEIF的财产。本软件不得用于商业目的分发, 不得全部或部分更改或重复使用,也不得出售给任何第三方。

最新版本,功能齐全

我们始终建议您安装最新版本的软件,以充分利用您的DEIF产品。

所有更新的软件都可以从www.deif.cn->支持->下载->软件栏目下下载。

如果您在查找产品的相关软件时有任何疑问或问题,请随时致电丹控电气(上海)有限公司,电话: +86 21 68796200,或者发送电子邮件至support@deif.cn, 我们随时为您服务。