SGC Smart Connect Mk II

您即将下载 SGC Smart Connect Mk II

您已选择下载我们的软件。

几秒钟内,您将收到一封包含下载链接的电子邮件。

如果使用软件有问题,请联系support@deif.cn.

诚挚的祝福,

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

本软件适用于以下DEIF产品

您即将下载 1.4.0.0

与上一版本相比,主要更新如下:

DEIF Smart Connect Software for SGC 1xx / 4xx Mk II

  • Supports SGC 120 Mk ll R12 to R16.
  • Supports SGC 420 Mk ll R12 to R16.
  • Supports SGC 120 Mk ll Lite R16.
  • Supports SGC 420 Mk ll Lite R16.

New Features

  • Added Custom Sensor for SGC 120 Mk ll.
  • Added Portuguese translation for SGC 120 Mk ll.
  • Added Spanish  translation for SGC 120 Mk ll.
  • Added support for Russian Hebrew, Ukrainian, Turkish texts for SGC 120 Mk ll & 420 Mk ll.
  • Added support for SGC 120 Mk ll Lite & SGC 420 Mk ll Lite.

Changes

  • Updated range of LOP sensor from (0-10) to (0-99) for SGC 120 Mk ll & 420 Mk ll.
  • Updated On and OFF Delay of M-logic to (0-600 sec) for SGC 120 Mk ll & 420 Mk ll.
版本号 发布日期 描述

1.4.0.0

15/10/2024

DEIF Smart Connect Software for SGC 1xx / 4xx Mk II

  • Supports SGC 120 Mk ll R12 to R16.
  • Supports SGC 420 Mk ll R12 to R16.
  • Supports SGC 120 Mk ll Lite R16.
  • Supports SGC 420 Mk ll Lite R16.

New Features

  • Added Custom Sensor for SGC 120 Mk ll.
  • Added Portuguese translation for SGC 120 Mk ll.
  • Added Spanish  translation for SGC 120 Mk ll.
  • Added support for Russian Hebrew, Ukrainian, Turkish texts for SGC 120 Mk ll & 420 Mk ll.
  • Added support for SGC 120 Mk ll Lite & SGC 420 Mk ll Lite.

Changes

  • Updated range of LOP sensor from (0-10) to (0-99) for SGC 120 Mk ll & 420 Mk ll.
  • Updated On and OFF Delay of M-logic to (0-600 sec) for SGC 120 Mk ll & 420 Mk ll.

1.2.1.0

27/06/2024

DEIF Smart Connect Software for SGC 1xx / 4xx Mk II
• Supports SGC 120 Mk ll R12 to R15.
• Supports SGC 420 Mk ll R12 to R16.

New Features    
• Language: Added support for Romanian in Smart Connect.
• Language: Added support for Spanish in Smart Connect & Controller Display.

Changes
• On and OFF Delay for M-Logic Range updated to 0-600 seconds.
• LOP sensor range changed from 0-10 to 0-99.
• Custom sensor Name editable from engine Module.

1.2.0.0

24/04/2024

DEIF Smart Connect Software for SGC 1xx / 4xx Mk II
• Supports SGC 120 Mk ll R12 to R15.
• Supports SGC 420 Mk ll R12 to R15.

New features
• Compatibility of SGC 120 R15.00 added.
• Validation of interlocks.
• Summary table for digital input, output and analogue input added.
• Reading the event log in live mode added.
• Reading and writing of M-Logic in live mode added.

1.1.4.18

28/02/2024

DEIF Smart Connect Software for SGC 1xx / 4xx Mk II
• Supports SGC 120 Mk ll R12 to R14.
• Supports SGC 420 Mk ll R12 to R15.

New features
• Support for SGC 420 Mk ll R15.0.
• Added digital input summary.
• Added digital output summary.
• Added analog input summary.
• Updated translations.

1.1.3.5

01/12/2023

DEIF Smart Connect Software for SGC 1xx / 4xx Mk II

• Supports SGC 120 Mk ll R12, R13 & R14.
• Supports SGC 420 Mk ll R12, R13 & R14.

1.1.0.44

15/09/2023

DEIF Smart Connect Software for SGC 1xx / 4xx Mk II

• Initial release.
• Supports SGC 120 Mk ll R12.0.
• Supports SGC 420 Mk ll R12.0 & R13.0.

在此页面,您可以下载产品的更新软件,并使用各种实用工具和附加组件设置、检测故障和配置产品。

请注意,用户无法更新我们的所有产品。同时也不是所有产品都配有实用工具。因此,本页的软件列表不能视为DEIF产品的概述。

DEIF将登记您注册的下载邮箱地址,以便在未来需要时发送有关的更新信息。

DEIF不对产品更新失败或使用实用工具造成的任何后果负责。DEIF A/S也不对软件升级导致的产品行为变化的后果负责。用户始终有责任在调试前确保正确的设置和配置。请在更新产品之前查阅软件的更新日志。

www.deif.cn软件下载许可协议

下载的软件仍是DEIF的财产。本软件不得用于商业目的分发, 不得全部或部分更改或重复使用,也不得出售给任何第三方。

最新版本,功能齐全

我们始终建议您安装最新版本的软件,以充分利用您的DEIF产品。

所有更新的软件都可以从www.deif.cn->支持->下载->软件栏目下下载。

如果您在查找产品的相关软件时有任何疑问或问题,请随时致电丹控电气(上海)有限公司,电话: +86 21 68796200,或者发送电子邮件至support@deif.cn, 我们随时为您服务。