MVR FW 250 series

您即将下载 MVR FW 250 series

您已选择下载我们的软件。

几秒钟内，您将收到一封包含下载链接的电子邮件。

如果使用软件有问题，请联系support@deif.cn.

诚挚的祝福，

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

您即将下载 2.5.7.1-245

与上一版本相比，主要更新如下：

New features 

  • Hardware: Support for T option card (1 x mA output - 4 x mA input).
  • Function: DIF (Idx>) [87T] and GMAG: Individual setting groups (SGS2). 
  • Generator module: Nominal scaling manual mode. 
  • VRG1 (Vreg) [90]: Parallel Voltage Regulator.
  • GMAG: Excitation current to mA Out channel selection. 
  • HMI: Alarm view colour selector. 
  • HMI: Arabic language to start screen. 
  • HMI: Chinese font support for objects. 
  • Communication: Ethernet GOOSE storm protection parameter. 
  • Communication: Double Ethernet PRP ports parameter.
  • Communication: Support for PTP power profiles and VLAN-tagged frames. 
  • Communication: Scaled analogue inputs to IEC 104. 
  • Communication: CTS2 to IEC 61850 mapping. 
  • Communication: URX1 and URX2 [21X] conditions to IEC 61850. 
  • Communication: VHZ1 (2) conditions to IEC 61850. 
  • Communication: Capacitor Protection Module Conditions COL1/2 and CNU1 to legacy protocols. 
  • Communication: U3/U4 frequency to IEC 61850. 
  • Communication: Switch positions added to GOOSE.
  • Communication: GOOSE analogue values added to HMI and programmable stages.

Changes

  • Pole Slip [78]: Function improvements.
  • Synchro check [25]: Added LL/DL/LD/DD mode, ability to select line or bus as reference, additional signals. 
  • HMI: Default mimic updated to light theme. 
  • HMI: Several menu item and text adjustments, addition of function ANSI codes. 
  • Fault register: "Fault values register" and "Measurement value recorder" renamed to “Fault register”.

 

Corrections

  • Synchro check [25]: SYN2 and SYN3 force status. 
  • Current transformer supervision: Current transformer supervision functionality was not working if delay was not zero. 
  • Directional overcurrent (Idir>) [67]: Protection blocking set start to zero. 
  • Current unbalance (I2>) [46]: Adjustments to IDMT tripping time calculation. 
  • Voltage regulation (Vreg) [90]: Scaling curve positions were not working. 
  • Frequency measurement: Min/Max tracking frequency allowed limits were not working. 
  • Frequent start FSP (N>) [66]: Frequent start stage was not working correctly.
  • Logic: >= comparator was also activated on negative values. 
  • Objects: Default user level changed from operator to configurator. 
  • HMI: Push buttons were in undefined state after reboot if set to toggle mode. 
  • HMI: Reset to factory defaults will now reboot HMI and clear mimics and fault registers correctly. 
  • HMI: Custom event description display on event list. 
  • HMI: Vector and trip time characteristics.
  • HMI: Measurement bar scaling. 
  • Disturbance recorder: Recording failed when device name was more than 28 characters. 
  • Disturbance recorder: Issues saving digital outputs to "REC Digital channels" - selection. 
  • Underexcitation protection (X<) [40]: RX circle radius was renamed from diameter to radius to reflect intended functionality.
  • Frequency protection f>/< [81O/81U]: fmeas/fset value was always zero. 
  • Harmonics measurement: Harmonic measurement percentage values were "Infinite". 
  • NOC1 (I>) [50/51]: Fault register was not showing fault phases correctly. 
  • Communication/ IEC 61850: Energy measurement demand values not updating. 
  • Communication/ IEC 61850: UCP1 (IUC>) [46C]: UIC Testout event inconsistency. 
  • Communication/ IEC 61850: SOTF: SOF1GGIO1 condition check not updating.
版本号 发布日期 描述

2.5.7.1-245

28/03/2025

New features 

  • Hardware: Support for T option card (1 x mA output - 4 x mA input).
  • Function: DIF (Idx>) [87T] and GMAG: Individual setting groups (SGS2). 
  • Generator module: Nominal scaling manual mode. 
  • VRG1 (Vreg) [90]: Parallel Voltage Regulator.
  • GMAG: Excitation current to mA Out channel selection. 
  • HMI: Alarm view colour selector. 
  • HMI: Arabic language to start screen. 
  • HMI: Chinese font support for objects. 
  • Communication: Ethernet GOOSE storm protection parameter. 
  • Communication: Double Ethernet PRP ports parameter.
  • Communication: Support for PTP power profiles and VLAN-tagged frames. 
  • Communication: Scaled analogue inputs to IEC 104. 
  • Communication: CTS2 to IEC 61850 mapping. 
  • Communication: URX1 and URX2 [21X] conditions to IEC 61850. 
  • Communication: VHZ1 (2) conditions to IEC 61850. 
  • Communication: Capacitor Protection Module Conditions COL1/2 and CNU1 to legacy protocols. 
  • Communication: U3/U4 frequency to IEC 61850. 
  • Communication: Switch positions added to GOOSE.
  • Communication: GOOSE analogue values added to HMI and programmable stages.

Changes

  • Pole Slip [78]: Function improvements.
  • Synchro check [25]: Added LL/DL/LD/DD mode, ability to select line or bus as reference, additional signals. 
  • HMI: Default mimic updated to light theme. 
  • HMI: Several menu item and text adjustments, addition of function ANSI codes. 
  • Fault register: "Fault values register" and "Measurement value recorder" renamed to “Fault register”.

 

Corrections

  • Synchro check [25]: SYN2 and SYN3 force status. 
  • Current transformer supervision: Current transformer supervision functionality was not working if delay was not zero. 
  • Directional overcurrent (Idir>) [67]: Protection blocking set start to zero. 
  • Current unbalance (I2>) [46]: Adjustments to IDMT tripping time calculation. 
  • Voltage regulation (Vreg) [90]: Scaling curve positions were not working. 
  • Frequency measurement: Min/Max tracking frequency allowed limits were not working. 
  • Frequent start FSP (N>) [66]: Frequent start stage was not working correctly.
  • Logic: >= comparator was also activated on negative values. 
  • Objects: Default user level changed from operator to configurator. 
  • HMI: Push buttons were in undefined state after reboot if set to toggle mode. 
  • HMI: Reset to factory defaults will now reboot HMI and clear mimics and fault registers correctly. 
  • HMI: Custom event description display on event list. 
  • HMI: Vector and trip time characteristics.
  • HMI: Measurement bar scaling. 
  • Disturbance recorder: Recording failed when device name was more than 28 characters. 
  • Disturbance recorder: Issues saving digital outputs to "REC Digital channels" - selection. 
  • Underexcitation protection (X<) [40]: RX circle radius was renamed from diameter to radius to reflect intended functionality.
  • Frequency protection f>/< [81O/81U]: fmeas/fset value was always zero. 
  • Harmonics measurement: Harmonic measurement percentage values were "Infinite". 
  • NOC1 (I>) [50/51]: Fault register was not showing fault phases correctly. 
  • Communication/ IEC 61850: Energy measurement demand values not updating. 
  • Communication/ IEC 61850: UCP1 (IUC>) [46C]: UIC Testout event inconsistency. 
  • Communication/ IEC 61850: SOTF: SOF1GGIO1 condition check not updating.

在此页面，您可以下载产品的更新软件，并使用各种实用工具和附加组件设置、检测故障和配置产品。

请注意，用户无法更新我们的所有产品。同时也不是所有产品都配有实用工具。因此，本页的软件列表不能视为DEIF产品的概述。

DEIF将登记您注册的下载邮箱地址，以便在未来需要时发送有关的更新信息。

DEIF不对产品更新失败或使用实用工具造成的任何后果负责。DEIF A/S也不对软件升级导致的产品行为变化的后果负责。用户始终有责任在调试前确保正确的设置和配置。请在更新产品之前查阅软件的更新日志。

www.deif.cn软件下载许可协议

下载的软件仍是DEIF的财产。本软件不得用于商业目的分发, 不得全部或部分更改或重复使用，也不得出售给任何第三方。

最新版本，功能齐全

我们始终建议您安装最新版本的软件，以充分利用您的DEIF产品。

所有更新的软件都可以从www.deif.cn->支持->下载->软件栏目下下载。

如果您在查找产品的相关软件时有任何疑问或问题，请随时致电丹控电气(上海)有限公司，电话: +86 21 68796200，或者发送电子邮件至support@deif.cn, 我们随时为您服务。

更多信息