Multi-line 300 GPU 300 ver. 1.x.x.

您即将下载 Multi-line 300 GPU 300 ver. 1.x.x.

您已选择下载我们的软件。

几秒钟内，您将收到一封包含下载链接的电子邮件。

如果使用软件有问题，请联系support@deif.cn.

诚挚的祝福，

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

本软件适用于以下DEIF产品

您即将下载 1.0.1.1

与上一版本相比，主要更新如下：

This software package consist of:

  • Multi-line 300, GPU 300
  • Bundled with DU 300 SW version 1.0.10.0

GPU 300

Corrections:

  • BSP version 3.0.1.0 supported.

DU 300

New features:

  • Support for multiple menu levels.
  • Display shows a pop-up window for the user before going into service mode.
  • Informs the user about development of the software.

Changes:

  • Support for PlantSupervision ver 1.0.5.0.

Corrections:

  • IOM3.4: DO's are not shown on display and in PICUS.
  • Display is not loading min. and max. from parameters when they are changed.
  • Power derate temperature is not shown on DU until power cycle.
  • When changing type, DU sometimes freezes until it restarts.
  • DU300 reboot in view designer.
  • Not able to close alarm pop-up.
  • Alarm "trigger value" is not updated if the alarm is already in the alarm list.
  • DU300 does not check versions for individual REST resources.
  • View designer cannot add counters to counters template.
版本号 发布日期 描述

1.0.1.1

19/11/2019

This software package consist of:

  • Multi-line 300, GPU 300
  • Bundled with DU 300 SW version 1.0.4.0

​

Corrections:

  • BSP version 3.0.1.0 supported.

 

1.0.1.1

04/03/2019

This software package consist of:

  • Multi-line 300, GPU 300
  • Bundled with DU 300 SW version 1.0.10.0

GPU 300

Corrections:

  • BSP version 3.0.1.0 supported.

DU 300

New features:

  • Support for multiple menu levels.
  • Display shows a pop-up window for the user before going into service mode.
  • Informs the user about development of the software.

Changes:

  • Support for PlantSupervision ver 1.0.5.0.

Corrections:

  • IOM3.4: DO's are not shown on display and in PICUS.
  • Display is not loading min. and max. from parameters when they are changed.
  • Power derate temperature is not shown on DU until power cycle.
  • When changing type, DU sometimes freezes until it restarts.
  • DU300 reboot in view designer.
  • Not able to close alarm pop-up.
  • Alarm "trigger value" is not updated if the alarm is already in the alarm list.
  • DU300 does not check versions for individual REST resources.
  • View designer cannot add counters to counters template.

1.0.1.0

30/09/2016

This software package consist of:

  • Multi-line 300, GPU 300
  • Bundled with DU 300 SW version 1.0.4.0

 

GPU 300

Changes

  • Number of energy counters is reduced
  • Higher level of access restrictions in default user permission

Corrections:

  • Disabling custom logic will reset all outputs used in custom logic
  • It is now possible to connect three displays to one controller
  • Custom alarm will now clear status output when un-configured
  • Corrected a problem where an alarm could be frozen in shelve state
  • Energy counters are now more accurate

 

DU 300

No changes

在此页面，您可以下载产品的更新软件，并使用各种实用工具和附加组件设置、检测故障和配置产品。

请注意，用户无法更新我们的所有产品。同时也不是所有产品都配有实用工具。因此，本页的软件列表不能视为DEIF产品的概述。

DEIF将登记您注册的下载邮箱地址，以便在未来需要时发送有关的更新信息。

DEIF不对产品更新失败或使用实用工具造成的任何后果负责。DEIF A/S也不对软件升级导致的产品行为变化的后果负责。用户始终有责任在调试前确保正确的设置和配置。请在更新产品之前查阅软件的更新日志。

www.deif.cn软件下载许可协议

下载的软件仍是DEIF的财产。本软件不得用于商业目的分发, 不得全部或部分更改或重复使用，也不得出售给任何第三方。

最新版本，功能齐全

我们始终建议您安装最新版本的软件，以充分利用您的DEIF产品。

所有更新的软件都可以从www.deif.cn->支持->下载->软件栏目下下载。

如果您在查找产品的相关软件时有任何疑问或问题，请随时致电丹控电气(上海)有限公司，电话: +86 21 68796200，或者发送电子邮件至support@deif.cn, 我们随时为您服务。

更多信息