Multi-line 2 ALC Application Software series 4x

您即将下载 Multi-line 2 ALC Application Software series 4x

您已选择下载我们的软件。

几秒钟内,您将收到一封包含下载链接的电子邮件。

如果使用软件有问题,请联系support@deif.cn.

诚挚的祝福,

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

本软件适用于以下DEIF产品

您即将下载 4.14.0

与上一版本相比,主要更新如下:

PM compatibility version 1.34.0

New features:

  1. Five new M-Logic alarms 10-14 added in menu 3660-3700.

 

Changes:

  1. Nominal power for each load group increased from 10 MW to 32 MW.

 

Corrections:

  1. Translation now works even though no DU-2 is mounted and only new language is written.

 

 

版本号 发布日期 描述

4.14.0

03/06/2024

PM compatibility version 1.34.0

New features:

  1. Five new M-Logic alarms 10-14 added in menu 3660-3700.

 

Changes:

  1. Nominal power for each load group increased from 10 MW to 32 MW.

 

Corrections:

  1. Translation now works even though no DU-2 is mounted and only new language is written.

 

 

4.13.0

15/06/2021

PM compatibility version 1.23.1.

New features:

  • Load-groups are now able to close on a dead busbar in AUTO mode. This can be activated via Modbus commands, Modbus control register or M-Logic.
  • Eight low frequency alarms are added. These are placed in menus 1000-1070.

Changes:

  • Faster execution of load-groups closing.
  • Four output relays on terminals 118-119, 118-120, 121-122 and 123-124 are now configurable.

4.12.0

26/11/2020

PM compatibility version 1.21.0.

New features:

  •    Configurable amount of units for triggering Fatal CAN Error alarm is added in menu 8800.

Changes:

  •    Support of ASC-4 redundancy.

Corrections:

  •    Corrected that selection of ‘Number of PMS units’ and ‘PMS CAN baud rate’ previously would only work with default settings. and an issue with redundancy.

4.11.0

13/02/2020

PM compatibility version 1.16.0
Includes version 1.15.0

New features:

  •    Now possible to open and close LG's while position failure is present.
  •    Block LG fail classes added
          • Position failure alarms set default to LG Block fail class.

Corrections:

  •    Corrected ALC Breaker Feedback Emulation.

4.10.1

10/01/2020

PM compatibility version 1.16.0

Corrections:

  •    Horn relay now working
  •    M-Logic PMS flags for GB/MB closed now working 
  •    LG(load group) pos. fail alarm now possible when LG is disabled

4.10.0

12/12/2019

PM compatibility version 1.16.0

Features:

  •    32 DG/Mains support
          • Support of 32 DG's in ID range 1-32 (AGC-4/200, version 4.65.0 required).
          • Support of 32 Mains in ID range 1-32 (AGC-4/200, version 4.65.0 required).
          • Support of 16 ASC's in ID range 25-40 (ASC-4, version 4.06.0 required).
          • Support of  8 ALC's in ID range 25-40.
  •    Support of ASC PV and Battery.
  •    Heavy Consumer logic added.
  •    Flip/Flops added to M-logic.

Changes:

  •    Disconnect Load can now be set to 200 % and 999 sec.

Corrections:

  •    Corrected: Tripped open relay hanging on redundant unit.
  •    Corrected: LG's are not opened in AUTO mode when disabled.
  •    Corrected: Digital input alarms are not activated by input.

4.00.1

29/01/2018

Corrections:

  • In some instances, all fail classes were initialised to "Shutdown" unintentionally.

4.00.0

30/10/2017

PM compatibility version 1.15.0
  
Features:
1- Includable in Power Management application type "Standard" together with AGC-4 and AGC 200.
a) Up to 16 gensets.
  b) Up to 16 mains.
c) Up to 8 BTBs/ALCs in plants.
d) Spinning reserve support.
2- Able to close and open breakers according to available power from DG. 
3- Able to place the ALC in mains load point.  

在此页面,您可以下载产品的更新软件,并使用各种实用工具和附加组件设置、检测故障和配置产品。

请注意,用户无法更新我们的所有产品。同时也不是所有产品都配有实用工具。因此,本页的软件列表不能视为DEIF产品的概述。

DEIF将登记您注册的下载邮箱地址,以便在未来需要时发送有关的更新信息。

DEIF不对产品更新失败或使用实用工具造成的任何后果负责。DEIF A/S也不对软件升级导致的产品行为变化的后果负责。用户始终有责任在调试前确保正确的设置和配置。请在更新产品之前查阅软件的更新日志。

www.deif.cn软件下载许可协议

下载的软件仍是DEIF的财产。本软件不得用于商业目的分发, 不得全部或部分更改或重复使用,也不得出售给任何第三方。

最新版本,功能齐全

我们始终建议您安装最新版本的软件,以充分利用您的DEIF产品。

所有更新的软件都可以从www.deif.cn->支持->下载->软件栏目下下载。

如果您在查找产品的相关软件时有任何疑问或问题,请随时致电丹控电气(上海)有限公司,电话: +86 21 68796200,或者发送电子邮件至support@deif.cn, 我们随时为您服务。