Grid-tied hybrid power
For hybrid power plants connected to the power grid, DEIF can deliver control solutions that ensure reliable power from hybrid sources, for example in IPP and grid support applications.
DEIF controllers are compliant with major grid codes, helping you produce a fixed amount of power for the grid anywhere in the world. The controllers can be configured to ensure a fixed power factor (PF) as per your requirements. They can also provide grid support, automatically adjusting power and reactive power references in accordance with frequency and voltage abnormalities in unstable grids.
Maximising sustainable power
In hybrid applications with one or more renewables, DEIF controllers are factory configured to maximise sustainable power penetration from PV panels, wind turbines, and more, and they facilitate the use of energy storage systems (ESS) to store green power, provide fast backup, and carry out peak shaving and load sharing. You can configure load-dependent genset start/stop (with a genset controller) and minimum genset load constraints (with a PV controller). DEIF PV controllers are also compatible with sky imager solutions and weather stations.
Watch the webinar about ASC Brownfield Open Power Management and Hybrid News.
Read our Hybrid Power applicationguide
Many ESS options
Adding an ESS gives you many design options. Like a genset, it can provide spinning reserve functionality to ensure uptime, and it can be configured to ensure optimal genset load. You can use energy source or power source control, and the ESS can run in grid-forming, grid-following, or droop mode (acting as a virtual synchronous generator). You can base charging/discharging on schedular command timers and set up the ESS to communicate with a BCU, BMS, or PCS over Modbus.
Greenfield power management solution
- Solar, storage, wind, mains, and genset integration in hybrid applications
- ASC-4 sustainable controllers and AGC-4 Mk II/AGC 150 let you control up to 32 gensets
- Applications with up to 16 sustainable power plants
- Maximised sustainable power penetration
- Ideal for self-consumption applications
- Priority of connected power sources can be defined and changed
- Built-in power metering
- Highly customisable with user-friendly M-Logic tool
Click on the green dots to learn more about our products
MVR
The MVR-200 series provides an optimal protection and control solution for any utility, power plant, wind power, offshore, marine, industrial, commercial or institutional electrical protection.
Instruments and switchboard accessories
DEIF offers a wide range of analogue meters, transducers, multi-instruments and hour-counters. The product range also comprises various current transformers for standard AC measurement and AC protection.
AGC 150 Mains
The AGC 150 Mains controller can synchronise one or two breakers (mains breaker and tie breaker) plus protect and monitor the utility.
AGC-4 MK II
![AGC 4 Mk II[2925]](https://deif-cdn-umbraco.azureedge.net/media/szxdlrap/agc-4-mk-ii-2925.png?width=1200&height=675&v=1da915236affd20&v=9)
The automatic genset controller AGC-4 Mk II is the world’s most comprehensive genset controller offering all necessary functions for protection and control
* Don’t forget to check out our switchboard and instrument accessories and HMI panels
ASC-4 Solar
Ideally suited for greenfield hybrid power plants, the ASC-4 Solar controller can interface with other DEIF controllers and a wide range of PV inverters, enabling you to integrate solar power in greenfield applications and maximise sustainable power penetration.
ASC 150 Solar
The ASC 150 Solar provides effective, flexible, and scalable photovoltaic (PV) inverter control with a wide range of options for greenfield and brownfield hybrid power applications.
ASC- 4 Battery
The ASC-4 Battery lets you quickly and easily add energy storage systems (ESS) such as batteries in greenfield hybrid applications with other DEIF controllers, providing seamless energy storage in commercial and industrial applications.
ASC 150 Storage
The ASC 150 Storage provides effective, flexible, and scalable energy storage system (ESS) control with a wide range of options for greenfield and brownfield hybrid power applications.
ASC-4 Wind
With its ability to control one turbine or an entire wind park, the ASC-4 Wind sustainable controller allows integration of wind power in any power plant. It can be used in an intelligent power or energy management system (PMS/EMS), balancing sources to cover demand while maximising renewable power penetration. The ASC-4 Wind is available as a fully customised solution for specific projects and is ideally suited for hybrid microgrid applications.
* Don’t forget to check out our switchboard and instrument accessories and HMI panels
AGC 150 Genset
The AGC 150 Genset controller containing all necessary functions for control and protection of a genset. The slim design makes the genset controller suitable for paralleling even small gensets thus the AGC 150 is integrable in nearly all types of gensets.
AGC 4 MK II
The automatic genset controller AGC-4 Mk II is the world’s most comprehensive genset controller offering all necessary functions for protection and control
DVC 550
DVC 350
The DVC 350 is a cost-effective digital AVR that offers a wide range of alternator protections and functions. Its digital setup options make it ideally suited for volume production.
Short lead times and timely delivery
Our extensive manufacturing capacity allows us to meet any volume demand – regardless of geographical destination. We work hard to make sure our customers receive orders as quickly as possible, and we ship standard products in less than 7 days.
We manufacture all our products in-house at our Danish HQ in Skive to ensure we continue to meet demand and reduce customer lead times. So if you are struggling to get hold of control products through your usual supply channels, there has never been a better time to talk to DEIF.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark
高级控制器 AGC 150 混动控制器
- Minimum Genset load
- Load calculation in terms of solar power
- Genset start/stop based on mains import/export
- Genset start/stop based on PV production
- PV included in mode: MPE Mains Power export/import
- PV included in mode: LTO Load Take over
- PV included in mode: Fixed Power
- PV included in mode: AMF Automatic Mains Failure
- PV included in mode: Peak Shaving
发电机组控制器 AGC-4 Mk II
- 市网失电自启动(AMF)时序
- 多主站功率管理
- 基础功率管理 (支持32台机)
- 扩展功率管理(超过32台机)
- RMB变压器远程维护支持32台机
- PLC逻辑编程
- 发动机CAN总线
- 导轨安装
- 灵活的硬件
- 基于CAN总线的附加输入/输出模块(9个CIO)
- 冗余控制器
- 功率管理的冗余CAN总线
- N+X功能
- 先合闸后励磁/6秒内启动备用电源
- 支持DEIF数字调压器DVC 550
- 多用途PID调节
- 支持电网规范VDE AR-N 4110/4105(德国中压), VDE AR-N 4105(德国低压), EN 50549-1:2019(欧洲), ENA EREC G99(英国)
- 支持触摸屏配套 (如TDU107)
- 支持Tier 4 终极第5阶段
- 仿真以简化培训和工厂调试
- 混动电源管理
- 重载 (通过ALC-4)
- 燃油优化
- 完全兼容AGC 150和ASC-4
- 通过UL认证，正在进行TÜV认证
智能人机界面 AGI 400
- 宽屏显示
- 玻璃表面
- 电容式触摸屏
- 多点触屏
- 坚固的铝外壳
- SD卡插槽，方便存储和更新
- USB端支持打印机，配件，数据储存和更新
- 可调节的LED背光
- 支持移动端的网页远程访问
- 3个以太网与集成交换机端口
- 支持串行通讯，RS-232, RS-422和RS-485
- 支持众多的工业协议
- OPC UA服务器和客户端
- JAVA脚本语言
- 可选CODESYS V3
- 强大的ARM Cortex-A9处理器
- 即插式CANbus, CANopen和J1939模块
- 操作温度-20℃至+60℃
- 船级社认证
- 专为恶劣环境而设计
- 提供7英寸、10英寸、15英寸和21英寸的规格
