Hybrid power
With both AC, DC and combination power architectures you can integrate batteries, fuel cells, shore power, and future marine power sources using DEIF control devices. By integrating sustainable power sources, you enable hybrid propulsion and power for onboard equipment, and you gain several opportunities for load sharing and performance optimisation.
You can control a battery inverter and inverter breaker using the PPM/PPU 300 Hybrid. The controller integrates closely with your power and energy management system and ensures that the battery is charged or discharged as needed, for example to provide peak shaving or emission-free propulsion in sensitive marine areas, and to provide instant power when the load demand surges.
Fuel cells can be added in the same way as batteries, and you can control the fuel cell inverter using a PPM/PPU 300 Hybrid. Both batteries and fuel cells are ideally suited for integration on the DC side in combination bus architectures or in pure DC solutions, but you can also integrate them in an AC solution by adding converters.
You can control a shore power switchboard with a PPM/PPU 300 Hybrid, allowing your ship to run on shore grid or battery power and reducing harmful emissions while in port. Depending on whether the shore power connection supplies AC or DC, it can feed the AC or DC side of a combination bus architecture or a pure AC or DC bus solution directly (or be converted from AC to DC or vice versa on board as required).
There are other ways of reducing vessel fuel consumption and emissions, for example waste heat recovery systems that generate electricity from exhaust heat (typically by using the heat to power boilers and generate electricity in a turbine). You can control the turbine using a PPM/PPU 300 and ensure integration in the ship's power and energy management system.
Click on the green dots to learn more about our products
Wind sensors
WSS 550
Ship navigation relies on accurate, real-time wind data to capture changes in wind speed or direction, helping the crew correct the course or avoid potentially dangerous situations. DEIF’s WSS 550 wind sensor combined with the XDi-N indicator is a cost effective and flexible solution that meets the everyday wind measuring needs of the maritime sector.
Read more
WSS 750
Ship navigation relies on accurate, real-time wind data to capture changes in wind speed or direction, helping the crew correct the course or avoid potentially dangerous situations. This is especially true for the harshest marine environments. The DEIF WSS 750 wind sensor combined with the DEIF XDi-N indicator is a cost effective and flexible solution that meets the harshest wind measuring needs of the maritime sector.
Read more
XDi-N (wind)
DEIF’s top of the range display based bridge indicator, combined with a Wind and Weather library and DEIF’s WSS 550/750 wind sensors, offers a number of advanced space, cost and time saving functions in one indicator.
Read more
XDi-N (Navigation)
DEIF’s top of the range display based bridge indicator, combined with a Navigation library, offers a number of advanced space, cost and time saving functions in one indicator.
Read more
Indicators
XDi
XDi - Digitalisation of traditional analogue bridge indicators, creating a compact, easy-to-install, versatile and user-friendly solution to today's bridge indicator challenges.
Read more
XL
DEIF’s robust, accurate and flexible illuminated bridge indicators are designed to meet the unique regulatory, space and integration challenges of today’s bridge environment.
Read more
Bridge wing
BRW-2 & BW
Taking DEIF’s XL illuminated indicator technology and scale designs outdoors, the BRW-2 and BW indicators offer the same robust, accurate and flexible features as the XL range of illuminated bridge indicators and are designed to meet the unique regulatory and integration challenges of bridge wings.
Read more
Blueflow
What if we told you that installing the energy management system Blueflow would lower your fuel consumption instantly with a minimum of 10 % in case of proper use? Not as a result of slowing down but a consequence of your crew’s increased awareness!
Read more
Emergency Switchboard
PPU 300
The PPU 300 Paralleling and Protection Unit is a highly configurable controller designed for marine use.
Read more
PPM 300
Designed for applications in the marine and offshore industry, DEIF's innovative PPM 300 solution is a versatile, intelligent controller platform for power management and generator control.
MIC-2 MK II
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
Read more
Instruments
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
Read more
EPQ96-2
The EPQ96-2 is a digitally controlled electronic unit that replaces normal motor potentiometers for control of electronic speed governors.
Read more
SIM-Q MK II
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in both AC and DC networks.
Read more
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
Read more
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
Read more
PFQ
The PFQ power factor meter measures cos phi with a moving coil movement and an electronic transducer.
Read more
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
Read more
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
Read more
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
Read more
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
Read more
AGC 150 Generator Marine
The AGC 150 Generator Marine is a robust, cost-effective, and user-friendly non-synchronising generator control solution for demanding marine applications
GPU 300
The GPU 300 generator protection unit is designed for marine use. Each controller contains all the functions that are needed to protect electrical equipment with a breaker, for example, a diesel generator, a busbar, or a motor.
XDi
XDi - Digitalisation of traditional analogue bridge indicators, creating a compact, easy-to-install, versatile and user-friendly solution to today's bridge indicator challenges.
Read more
XL
DEIF’s robust, accurate and flexible illuminated bridge indicators are designed to meet the unique regulatory, space and integration challenges of today’s bridge environment.
Read more
PPU 300
The PPU 300 Paralleling and Protection Unit is a highly configurable controller designed for marine use.
Engineered solutions
MDR-2
The MDR-2 is a state-of-the-art combined differential protection and short-circuit protection relay for generator protection against internal short circuits (leaking currents).
Read more
MVR
The MVR-200 series provides an optimal protection and control solution for any utility, power plant, wind power, offshore, marine, industrial, commercial or institutional electrical protection.
Read more
Instruments
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
Read more
EPQ96-2
The EPQ96-2 is a digitally controlled electronic unit that replaces normal motor potentiometers for control of electronic speed governors.
Read more
SIM-Q MK II
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in both AC and DC networks.
Read more
MIC-2 MK II
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
Read more
EQ
The EQ is a versatile quadratic moving iron instrument for measuring AC currents and AC voltages within the range 16 to 65 Hz.
Read more
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
Read more
WQ
The WQ, power meter, measures power or reactive power using a moving coil movement. The power meter has a built-in electronic watt or var transducer.
Read more
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
Read more
PFQ
The PFQ power factor meter measures cos phi with a moving coil movement and an electronic transducer.
Read more
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
Read more
KBU
AL8-2
AGI 400
AMC 600
PPU 300 Hybrid (battery) controller
Customisable controller for hybrid power plants with batteries
PPM 300 Hybrid controller
Customisable hybrid controller with extensive power management features
Engineered solutions
MDR-2
The MDR-2 is a state-of-the-art combined differential protection and short-circuit protection relay for generator protection against internal short circuits (leaking currents).
Read more
MVR
The MVR-200 series provides an optimal protection and control solution for any utility, power plant, wind power, offshore, marine, industrial, commercial or institutional electrical protection.
Read more
Instruments
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
Read more
EPQ96-2
The EPQ96-2 is a digitally controlled electronic unit that replaces normal motor potentiometers for control of electronic speed governors.
Read more
SIM-Q MK II
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in both AC and DC networks.
Read more
MIC-2 MK II
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
Read more
EQ
The EQ is a versatile quadratic moving iron instrument for measuring AC currents and AC voltages within the range 16 to 65 Hz.
Read more
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
Read more
WQ
The WQ, power meter, measures power or reactive power using a moving coil movement. The power meter has a built-in electronic watt or var transducer.
Read more
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
Read more
PFQ
The PFQ power factor meter measures cos phi with a moving coil movement and an electronic transducer.
Read more
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
Read more
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
Read more
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
Read more
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
Read more
AMC 600
With its modular, service-friendly design, compact size, and extensive customisation options, the AMC 600 offers great performance and flexibility for land and wind power control applications.
PPM 300
Designed for applications in the marine and offshore industry, DEIF's innovative PPM 300 solution is a versatile, intelligent controller platform for power management and generator control.
PPU 300
The PPU 300 Paralleling and Protection Unit is a highly configurable controller designed for marine use.
Read more
Diesel/Auxiliary Genset
Engine controller
AGC 150 Generator Marine
The AGC 150 Generator Marine is a robust, cost-effective, and user-friendly non-synchronising generator control solution for demanding marine applications.
Read more
Diesel/Auxiliary Generator - Switchboard
Engineered solutions
MDR-2
The MDR-2 is a state-of-the-art combined differential protection and short-circuit protection relay for generator protection against internal short circuits (leaking currents).
Read more
MVR
The MVR-200 series provides an optimal protection and control solution for any utility, power plant, wind power, offshore, marine, industrial, commercial or institutional electrical protection.
Read more
Instruments
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
Read more
EPQ96-2
The EPQ96-2 is a digitally controlled electronic unit that replaces normal motor potentiometers for control of electronic speed governors.
Read more
SIM-Q MK II
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in both AC and DC networks.
Read more
MIC-2 MK II
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
Read more
EQ
The EQ is a versatile quadratic moving iron instrument for measuring AC currents and AC voltages within the range 16 to 65 Hz.
Read more
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
Read more
WQ
The WQ, power meter, measures power or reactive power using a moving coil movement. The power meter has a built-in electronic watt or var transducer.
Read more
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
Read more
PFQ
The PFQ power factor meter measures cos phi with a moving coil movement and an electronic transducer.
Read more
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
Read more
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
Read more
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
Read more
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
Read more
Energy Storage System - Battery
Hybrid Power Source- Switchboard
Instruments
PPM 300 Hybrid controller
Customisable hybrid controller with extensive power management features
PPU 300 Hybrid (battery) controller
Customisable controller for hybrid power plants with batteries
SIM-Q MK II
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in both AC and DC networks.
Read more
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
Read more
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
Read more
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
Read more
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
Read more
AMC 600
With its modular, service-friendly design, compact size, and extensive customisation options, the AMC 600 offers great performance and flexibility for land and wind power control applications.
AMC 300
The robust and flexible AMC 300 controller allows you to build resilient solutions for marine and offshore applications. Designed by marine engineers for marine engineers, the Linux-based PLC platform includes industry-proven technologies like EtherCAT and is easy to specify, install, and maintain. The modular architecture ensures maximum design flexibility, and the rugged design and cutting-edge cyber security features ensure years of resilient and trouble-free operation.
PPM 300
Designed for applications in the marine and offshore industry, DEIF's innovative PPM 300 solution is a versatile, intelligent controller platform for power management and generator control.
PPU 300
The PPU 300 Paralleling and Protection Unit is a highly configurable controller designed for marine use.
Read more
MDR-2
The MDR-2 is a state-of-the-art combined differential protection and short-circuit protection relay for generator protection against internal short circuits (leaking currents).
Read more
MVR
The MVR-200 series provides an optimal protection and control solution for any utility, power plant, wind power, offshore, marine, industrial, commercial or institutional electrical protection.
Read more
Instruments
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
Read more
EPQ96-2
The EPQ96-2 is a digitally controlled electronic unit that replaces normal motor potentiometers for control of electronic speed governors.
Read more
SIM-Q MK II
The SIM-Q MKII monitors the insulation resistance between the connected network and an earth/safety cable. Using a unique measuring principle, it measures the insulation resistance in both AC and DC networks.
Read more
MIC-2 MK II
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
Read more
EQ
The EQ is a versatile quadratic moving iron instrument for measuring AC currents and AC voltages within the range 16 to 65 Hz.
Read more
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
Read more
WQ
The WQ, power meter, measures power or reactive power using a moving coil movement. The power meter has a built-in electronic watt or var transducer.
Read more
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
Read more
PFQ
The PFQ power factor meter measures cos phi with a moving coil movement and an electronic transducer.
Read more
ASK & ASR
Part of DEIF's current transformer range, these measuring transformers convert high current into lower nominal current value, thus making it possible to use instruments and relays with standardised values of rated current.
Read more
KBU
DEIF's split-core current transformers are cost-saving and easy-to-install units for responsible and efficient energy management solutions and for retrofitting existing installations.
Read more
AL8-2
With eight digital alarm inputs, three relay outputs and many flexible features, the AL8-2 alarm panel is suitable for alarm monitoring at industrial and marine plants.
Read more
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
Read more
Shore Connection - Local Switchboard
CSQ-3
The CSQ-3 integrates synchroscope and check synchronising relay into a microprocessor-controlled, easy-to-install solution. CSQ-3 is a multi-function synchroscope meter.
Read more
FQ & FTQ
With high immunity to 3rd harmonics, DEIF's frequency meters are suitable for all applications. The moving coil meters feature integrated electronics that convert frequency into analogue readings with accurate and linear readouts.
Read more
MIC-2 Mk II
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
Read more
VDQ96-sw
The VDQ96-sw has been designed to save switchboard builders space and installation time and does not require installation of normal selector switch. The instruments measure phase-to-phase currents and is available in 96 mm size only.
Read more
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
Read more
Bow Thrusters - Local Switchboard
MIC-2 Mk II
Versatile and intuitive, DEIF’s multi-instrument MIC-2 MKII is perfectly suited for monitoring and analysis of all types of power systems.
Read more
AMC 300
The robust and flexible AMC 300 controller allows you to build resilient solutions for marine and offshore applications. Designed by marine engineers for marine engineers, the Linux-based PLC platform includes industry-proven technologies like EtherCAT and is easy to specify, install, and maintain. The modular architecture ensures maximum design flexibility, and the rugged design and cutting-edge cyber security features ensure years of resilient and trouble-free operation.
AMC 600
With its modular, service-friendly design, compact size, and extensive customisation options, the AMC 600 offers great performance and flexibility for land and wind power control applications.
AGI 400
A comprehensive HMI solution, DEIF’s AGI 400 series connects to all DEIF Multi-line controllers, as well as third party electronics, via standard defined communication protocols, featuring functionalities which eliminate the need for other instruments, thus saving you both space and wiring.
Read more
Bow Thruster Bridge
XDi
XDi - Digitalisation of traditional analogue bridge indicators, creating a compact, easy-to-install, versatile and user-friendly solution to today's bridge indicator challenges.
Read more
Remote Access Support
Take advantage of DEIF’s Remote Access Support that enables certified engineers to remotely identify, diagnose, and resolve issues with your power management system.
Switchboard equipment
Good logistics are crucial to maintaining competitive advantages.
We customise logo, scales and colours to customer specifications and deliver in no time, making an extra effort to ensure that our products reach their destination in record time, undamaged and ready for fast and easy commissioning and subsequent operation.
The main switchboard and a number of subdistribution switchboards form the electrical central nervous system of the ship. Because they are critical to power supply, control and system monitoring, instrument robustness is among the most important quality parameters. Collaborating closely with classification societies, who audit our test results and methods before issuing certificates, our Type Test Lab performs measurements relevant for classification approvals and CE marking.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark