Tier-compliant redundancy for infrastructure
Click on the green dots to learn more about our products

AGC-4 Mk II

发电机组控制器AGC-4 Mk II是全球现有功能全面的发电机组控制器,提供保护和控制功能所需的所有功能。
AMC 300

强大灵活的AMC 300控制器为海上应用构建弹性解决方案。该平台由船舶工程师设计,基于Linux的PLC平台包括业界公认的技术,如EtherCAT,易于配置、安装和维护。模块化架构确保了最大的设计灵活性,坚固的硬件和尖端的网络安全功能确保多年灵活无故障的运行。
ALC-4

ALC-4非常适合关键电源应用,它将负载处理集成到电站管理系统中,解除了对传统PLC的需求。
AGC-4 Mk II

发电机组控制器AGC-4 Mk II是全球现有功能全面的发电机组控制器,提供保护和控制功能所需的所有功能。
DVC 550

用来监测和调节带有SHUNT、AREP (辅助绕组)或PMG (永磁励磁机)励磁类型的发电机的输出
Any component that would bring down your critical power system if it failed is called a single point of failure. To avoid blackouts, you need to eliminate all of these single points of failure by consistently ensuring redundancy for these components throughout the control architecture. By doing so, you keep your system online and can achieve tier level compliance.
The multi-master architecture of DEIF DCSes ensures that there is always a command unit able to control the PMS. You can also install hot standby controllers on all positions. Achieving tier-compliant redundancy is not just about the controllers; consider adding extra generator starter systems and a redundant UPS, use two physically separate communication lines, consider the network topology (for example using a ring bus), and remember that breakers and other mechanical equipment can also fail.
You can configure the AGC-4 Mk II controller for N+X redundancy. By freely selecting how many extra running generators (spinning reserve) you need in the system, you can quickly configure for compliance with even the strictest requirements.
If your entire PMS fails, DEIF controllers can be set up to run in switchboard mode using analogue load sharing that offers stable load sharing and lets you manually start and synchronise generators and prioritise your load groups.
Watch the webinar and get in-depth knowledge of critical power

Read our Infrastructure Guide

Short lead times and timely delivery
Our extensive manufacturing capacity allows us to meet any volume demand – regardless of geographical destination. We work hard to make sure our customers receive orders as quickly as possible, and we ship standard products in less than 7 days.
We manufacture all our products in-house at our Danish HQ in Skive to ensure we continue to meet demand and reduce customer lead times. So if you are struggling to get hold of control products through your usual supply channels, there has never been a better time to talk to DEIF.
-
Contact us to discuss your options
- 90 years of energy pioneering
- Manufactured at the highest standards
- Superior quality
- Unmatched service and support
- Made in Denmark