SGC 420 MkII Firmware 16.00

您即将下载 SGC 420 MkII Firmware 16.00

您已选择下载我们的软件。

几秒钟内,您将收到一封包含下载链接的电子邮件。

如果使用软件有问题,请联系support@deif.cn.

诚挚的祝福,

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

您即将下载 16.00

与上一版本相比,主要更新如下:

New Features

• EIC : Added support of Generic CPCB4+.
• EIC : Added support of Perkins CPCB4+.
• EIC : Added support of Scania EMS2 S6.
• EIC : Added support of Baudouin Gas.
• EIC : Updated SPN description database.
• Added Digital Input functions in M-logic Commands.
• Updated Custom Sensor Range Change to -3000 to 3000
• X (resistance, mA / V) Value in Live data view.
• Added DTC over MODBUS.
• Added Shutdown as fail Class in Maintenance Alarm.

 

Changes

• Run Hour Time available in both hours & minutes.

 

Corrections

• Fixed issue when "Auto Restore Inhibit" & "Mains Load Inhibit" are configured together.

版本号 发布日期 描述

16.00

27/06/2024

New Features

• EIC : Added support of Generic CPCB4+.
• EIC : Added support of Perkins CPCB4+.
• EIC : Added support of Scania EMS2 S6.
• EIC : Added support of Baudouin Gas.
• EIC : Updated SPN description database.
• Added Digital Input functions in M-logic Commands.
• Updated Custom Sensor Range Change to -3000 to 3000
• X (resistance, mA / V) Value in Live data view.
• Added DTC over MODBUS.
• Added Shutdown as fail Class in Maintenance Alarm.

 

Changes

• Run Hour Time available in both hours & minutes.

 

Corrections

• Fixed issue when "Auto Restore Inhibit" & "Mains Load Inhibit" are configured together.

版本号 发布日期 描述

R19.00

04/03/2026

R19.0 based on R18.0

New features

  • Introduced the LTO function.
  • Added the ability to mute low-level alarms.
  • Added support for updating dedicated public variables via Modbus.
  • Added support for the following engine communication protocols:
  • Motorpal 2.1
  • SDEC F31
  • SDEC ECTEK F36
  • Kingbang
  • Wise 18B
  • Volvo Penta CPCB IV 

Changes

  • The genset voltage and energy screens are now automatically hidden when alternator monitoring is disabled.
  • The mains voltage and energy screens are now automatically hidden when mains monitoring is disabled.
  • The Stop action timer range has been extended.

Improvements

  • Updated warning and shutdown return/trip interlocks to allow finer threshold differentiation and improved system accuracy.

 

R18.00

30/06/2025

R18.0 based on R17.0

New Features

  • Mute function for the low level inducement
  • Bosch MD1CE101, pointing to Generic J1939
  • RDC100 support
  • ECU Override function
  • Common/Genset Data screen

Changes

  • Increase Overload Delay range (from 600 to 3600 seconds)
  • Change minimum Fuel Level Range (from 2L to 0L) 
  • Modification of logic to display Fuel in litres on screen, based on Fuel Level Value

R17.00

03/02/2025

New features

  • DTC manager: added as a tool providing options to update SPN and FMI descriptions and ignore specific SPN/FMI codes.
  • Added the ability to display customer details on the boot-up screen through the display language tool.
  • Added Live link for remote display functionality.
  • Introduced a shutdown override function in digital inputs, allowing all shutdown alarms (except emergency stop) to be treated as warnings when activated.
  • Added "Shutdown" as an alarm action in the maintenance module.
  • Added activation and delay timers for custom sensors.
  • Added auto load transfer in manual mode as a separate parameter for mains.
  • Enabled external EGR support through digital input.
  • Added file information to relevant screens.
  • Added EIC data over Modbus.
  • Introduced an alternate nominal AC system.

Changes

  • Added breaker feedback interlock for generator and mains breakers.
  • The breaker status on the display now mimics the contractor / breaker feedback.
  • Nominal AC system configuration moved from alternator configuration to nominal values.
  • Updated Phase reversal handling during the stop sequence.
  • Updated EIC protocols:
      - Improved SDEC protocol handling.
      - Updated MTU ECU9 Eminox protocol.
      - Updated Volvo Stage V protocol.

16.00

27/06/2024

New Features

• EIC : Added support of Generic CPCB4+.
• EIC : Added support of Perkins CPCB4+.
• EIC : Added support of Scania EMS2 S6.
• EIC : Added support of Baudouin Gas.
• EIC : Updated SPN description database.
• Added Digital Input functions in M-logic Commands.
• Updated Custom Sensor Range Change to -3000 to 3000
• X (resistance, mA / V) Value in Live data view.
• Added DTC over MODBUS.
• Added Shutdown as fail Class in Maintenance Alarm.

 

Changes

• Run Hour Time available in both hours & minutes.

 

Corrections

• Fixed issue when "Auto Restore Inhibit" & "Mains Load Inhibit" are configured together.

R15.00

28/02/2024

SGC 420 Mk ll offline firmware.

New feature:

• Added these EIC protocols:
• PSI
• Isuzu
• Kohler
• JCB
• JCB 430/448 Stage V
• MAN
• Yuchai
• FPT Stage V
• Perkins Stage V
• Perkins Stage V 1204J
• Cummins KTA19
• Jichai JC15D Weifu
• Jichai WYS
• Jichai JC190
• Jichai JC15T JG
• Deutz EMR 5 Stage V
• Doosan Stage V
• Cummins CM2850
• Weichai e6gas
• Caterpillar ADEM 6
• Yanmar Stage V
• Volvo Stage V
• Volvo Penta EMS2
• MTU J1939
• Iveco Stage V
• Jing guan
• Deutz EMR 4
• Doosan G2 EDC17
• FPT EDC17
• Hatz EDC17
• MAN EDC17
• Perkins EDC17C49
• SDEC
• Steyr EDC17
• Xichai Gas
• YANMAR EDC17
• Yuchai YC-BCR
• Angle
• Baudouin Wise15
• Iveco CURSOR
• Iveco EDC7
• Iveco NEF
• Iveco Vector8
• Cummins CM2350
• Cummins CM2880
• Cummins CM2358
• DDEC III
• DDEC IV
• Deutz EMR 2
• Deutz EMR 3
• Deutz EMR 5
• Doosan MD1
• Kubota stage V
• MAN EMC Step 2.0
• MAN EMC Step 2.5
• MTU ECU8
• MTU ECU9
• Caterpillar ADEM 3
• Caterpillar ADEM 4
• Caterpillar ADEM Generic
• Perkins ADEM 3
• Perkins Generic
• Perkins StV 1200
• Perkins StV 400
• Volvo Penta EDC 3 (1500)
• Volvo Penta EDC 4 (1500)
• Volvo Penta EDC 3 (1800)
• Volvo Penta EDC 4 (1800)
• Volvo Penta EMS 2.3
• Volvo Penta EMS 2.4
• Weichai Gas
• Baudouin Wise10B
• Weichai Wise10B
• Weichai Wise15
• Yuchai diesel
• Yuchai gas
• VE E483/E694 CPCB IV

 

Changes:

• Fixed issue with mains timer.

R14.07

11/12/2023

SGC 420 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Added EIC - DDDEC protocol.
• Added EIC - John Deere protocol.
• Added EIC - John Deere Stage V Protocol.
• Added EIC - Scania S8 protocol.
• Added EIC - Kohler KDI3404 protocol.
• Added EIC - Bosch EDC17CV54 protocol.
• Added auto start and stop inhibit inputs.
• Added short to battery to sensors 3 and 4.
• Implemented Quick Flash (without config mode) for M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Removed the status screen lock during the start and stop sequences.
• Removed duplicated strings from display language pack.
• Removed duplicated strings from language pack.

END-USER LICENSE AGREEMENT (“EULA”) FOR DOWNLOADABLE SOFTWARE. (“the SOFTWARE PRODUCT”).

IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM INSTALL:

 

DEIF A/S End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and DEIF A/S for the DEIF A/S software product(s) identified above which may include associated software components, media, printed materials, and "online" or electronic documentation. By installing, copying, or otherwise using the our product, you agree to be bound by the terms of this EULA. This license agreement represents the entire agreement concerning the program between you and DEIF A/S, (referred to as "licenser"), and it supersedes any prior proposal, representation, or understanding between the parties. If you do not agree to the terms of this EULA, do not install or use the SOFTWARE PRODUCT.

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. DEIF controllers are licensed, not sold.

1. GRANT OF LICENSE.

The SOFTWARE PRODUCT is licensed as follows:

(a) Installation and Use.
DEIF A/S grants you the right to install and use copies of the SOFTWARE PRODUCT on your computer running a validly licensed copy of the operating system for which the SOFTWARE PRODUCT was designed Windows 7, Windows 8, Windows 10.

(b) Backup Copies.
You may also make copies of the SOFTWARE PRODUCT as may be necessary for backup and archival purposes.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

(a) Maintenance of Copyright Notices.
You must not remove or alter any copyright notices on any and all copies of the SOFTWARE PRODUCT.

(b) Prohibition on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.

(c) Rental.
You may not rent, lease, or lend the SOFTWARE PRODUCT.

(d) Compliance with Applicable Laws.
You must comply with all applicable laws regarding use of the SOFTWARE PRODUCT.

3. TERMINATION

Without prejudice to any other rights, DEIF A/S may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PRODUCT in your possession.

4. COPYRIGHT

All title, including but not limited to copyrights, in and to the SOFTWARE PRODUCT and any copies thereof are owned by DEIF A/S or its suppliers. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE PRODUCT is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not expressly granted are reserved by DEIF A/S.

5. NO WARRANTIES

DEIF A/S expressly disclaims any warranty for the SOFTWARE PRODUCT. The SOFTWARE PRODUCT is provided 'As Is' without any express or implied warranty of any kind, including but not limited to any warranties of merchantability, noninfringement, or fitness of a particular purpose. DEIF A/S does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the SOFTWARE PRODUCT. DEIF A/S makes no warranties respecting any harm that may be caused by the transmission of a computer virus, worm, time bomb, logic bomb, or other such computer program. DEIF A/S further expressly disclaims any warranty or representation to Authorized Users or to any third party.

6. LIMITATION OF LIABILITY

In no event shall DEIF A/S be liable for any damages (including, without limitation, lost profits, business interruption, or lost information) rising out of 'Authorized Users' use of or inability to use the SOFTWARE PRODUCT, even if DEIF A/S has been advised of the possibility of such damages. In no event will DEIF A/S be liable for loss of data or for indirect, special, incidental, consequential (including lost profit), or other damages based in contract, tort or otherwise. DEIF A/S shall have no liability with respect to the content of the SOFTWARE PRODUCT or any part thereof, including but not limited to errors or omissions contained therein, libel, infringements of rights of publicity, privacy, trademark rights, business interruption, personal injury, loss of privacy, moral rights or the disclosure of confidential information.