SGC 420 MkII Firmware

您即将下载 SGC 420 MkII Firmware

您已选择下载我们的软件。

几秒钟内,您将收到一封包含下载链接的电子邮件。

如果使用软件有问题,请联系support@deif.cn.

诚挚的祝福,

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

本软件适用于以下DEIF产品

您即将下载 R14.07

与上一版本相比,主要更新如下:

SGC 420 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Added EIC - DDDEC protocol.
• Added EIC - John Deere protocol.
• Added EIC - John Deere Stage V Protocol.
• Added EIC - Scania S8 protocol.
• Added EIC - Kohler KDI3404 protocol.
• Added EIC - Bosch EDC17CV54 protocol.
• Added auto start and stop inhibit inputs.
• Added short to battery to sensors 3 and 4.
• Implemented Quick Flash (without config mode) for M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Removed the status screen lock during the start and stop sequences.
• Removed duplicated strings from display language pack.
• Removed duplicated strings from language pack.

版本号 发布日期 描述

R14.07

11/12/2023

SGC 420 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Added EIC - DDDEC protocol.
• Added EIC - John Deere protocol.
• Added EIC - John Deere Stage V Protocol.
• Added EIC - Scania S8 protocol.
• Added EIC - Kohler KDI3404 protocol.
• Added EIC - Bosch EDC17CV54 protocol.
• Added auto start and stop inhibit inputs.
• Added short to battery to sensors 3 and 4.
• Implemented Quick Flash (without config mode) for M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Removed the status screen lock during the start and stop sequences.
• Removed duplicated strings from display language pack.
• Removed duplicated strings from language pack.

在此页面,您可以下载产品的更新软件,并使用各种实用工具和附加组件设置、检测故障和配置产品。

请注意,用户无法更新我们的所有产品。同时也不是所有产品都配有实用工具。因此,本页的软件列表不能视为DEIF产品的概述。

DEIF将登记您注册的下载邮箱地址,以便在未来需要时发送有关的更新信息。

DEIF不对产品更新失败或使用实用工具造成的任何后果负责。DEIF A/S也不对软件升级导致的产品行为变化的后果负责。用户始终有责任在调试前确保正确的设置和配置。请在更新产品之前查阅软件的更新日志。

www.deif.cn软件下载许可协议

下载的软件仍是DEIF的财产。本软件不得用于商业目的分发, 不得全部或部分更改或重复使用,也不得出售给任何第三方。

最新版本,功能齐全

我们始终建议您安装最新版本的软件,以充分利用您的DEIF产品。

所有更新的软件都可以从www.deif.cn->支持->下载->软件栏目下下载。

如果您在查找产品的相关软件时有任何疑问或问题,请随时致电丹控电气(上海)有限公司,电话: +86 21 68796200,或者发送电子邮件至support@deif.cn, 我们随时为您服务。