SGC 120 MkII Firmware R18.00

您即将下载 SGC 120 MkII Firmware R18.00

您已选择下载我们的软件。

几秒钟内,您将收到一封包含下载链接的电子邮件。

如果使用软件有问题,请联系support@deif.cn.

诚挚的祝福,

DEIF A/S

本软件受DEIF A/S版权保护。请点击上述链接可查阅DEIF A/S版权和许可协议(EULA)。

您即将下载 R18.00

与上一版本相比,主要更新如下:

SCG 120 Version R18.0 

New Features

  • Added support for MIO 100.
  • Added Custom Page Designer.
  • Added Yunnei protocol.
  • Added Motorpal version 2.1 protocol.
  • Added Cummins CM2670 protocol.
  • Added MTU ECU 9 Eminox protocol.
  •  Added TSC1 in Volvo protocol.
  • Added configurable child SA (Sub Application).
  • Added configurable inducement strategy.
  • Added support for digital inputs via Modbus.

Changes

  • Updated Perkins CPCB IV protocol.
  • Aligned mute functionality with SGC 420 Mk II.
  • Aligned fuel tank capacity with SGC 420 Mk II.
版本号 发布日期 描述

R18.00

11/12/2025

SCG 120 Version R18.0 

New Features

  • Added support for MIO 100.
  • Added Custom Page Designer.
  • Added Yunnei protocol.
  • Added Motorpal version 2.1 protocol.
  • Added Cummins CM2670 protocol.
  • Added MTU ECU 9 Eminox protocol.
  •  Added TSC1 in Volvo protocol.
  • Added configurable child SA (Sub Application).
  • Added configurable inducement strategy.
  • Added support for digital inputs via Modbus.

Changes

  • Updated Perkins CPCB IV protocol.
  • Aligned mute functionality with SGC 420 Mk II.
  • Aligned fuel tank capacity with SGC 420 Mk II.
版本号 发布日期 描述

R18.00

11/12/2025

SCG 120 Version R18.0 

New Features

  • Added support for MIO 100.
  • Added Custom Page Designer.
  • Added Yunnei protocol.
  • Added Motorpal version 2.1 protocol.
  • Added Cummins CM2670 protocol.
  • Added MTU ECU 9 Eminox protocol.
  •  Added TSC1 in Volvo protocol.
  • Added configurable child SA (Sub Application).
  • Added configurable inducement strategy.
  • Added support for digital inputs via Modbus.

Changes

  • Updated Perkins CPCB IV protocol.
  • Aligned mute functionality with SGC 420 Mk II.
  • Aligned fuel tank capacity with SGC 420 Mk II.

R17.00

31/03/2025

SGC 120 R17.00

New Features

  • DTC Manager: Added as a tool providing options to update SPN and FMI descriptions and ignore specific SPN/FMI codes.
  • Added the ability to display customer details on the boot-up screen through the display language tool.
  • Added Live Link for remote display functionality.
  • Added EIC support for the remote display product.
  • Added live button simulation implementation.
  • Added the LTO, remote acknowledge, auto mode, manual mode, digital inputs, and M-Logic event.
  • Added digital output for Louvre control command and pre-lube pump M-Logic command.
  • Added ECU override.
  • Added common screen for genset data.
  • Added ECI data on Modbus.
  • Added analogue sensor value in live data.

Changes

  • Phase reversal handling updated during the stop sequence.
  • Updated EIC protocol handling.
  • Improved SDEC protocol handling.
  • Updated MTU ECU9 Smart connect EIC modification.
  • Volvo Stage V EIC modifications.
  • Overload protection time has been increased from 600 to 3600 seconds.

R16.01

03/02/2025

Corrections

  • Fixed illegal Modbus address.

R16.00

15/10/2024

New features

  • Added 0-5V sensor selection for pin 23.
  • Added Custom Sensor.
  • Added Activation & Delay for Custom Sensors.
  • EIC: Added support for Baudouin Gas.
  • EIC: Added support for Baudouin Wise10B.
  • EIC: Added support for Caterpillar ADEM 6.
  • EIC: Added support for Deutz EMR 5 Stage V.
  • EIC: Added support for Doosan Stage V.
  • EIC: Added support for Generic CPCB IV.
  • EIC: Added support for Isuzu.
  • EIC: Added support for Iveco Stage V.
  • EIC: Added support for JCB.
  • EIC: Added support for JCB 430/448 Stage V.
  • EIC: Added support for Jichai JC15D Weifu.
  • EIC: Added support for Jichai JC15T JG.
  • EIC: Added support for Jichai JC190.
  • EIC: Added support for Jichai WYS.
  • EIC: Added support for Jing guan.
  • EIC: Added support for John Deere.
  • EIC: Added support for John Deere Stage V.
  • EIC: Added support for Kohler.
  • EIC: Added support for MAN.
  • EIC: Added support for MAN EMC Step 2.0.
  • EIC: Added support for MAN EMC Step 2.5.
  • EIC: Added support for Perkins CPCB IV.
  • EIC: Added support for Perkins Stage V 120xJ.
  • EIC: Added support for PSI.
  • EIC: Added support for  Scania EMS2 S6.
  • EIC: Added support for Weichai Diesel.
  • EIC: Added support for Weichai e6gas.
  • EIC: Added support for Weichai Gas.
  • EIC: Added support for Weichai Wise10B.
  • EIC: Added support for Weichai Wise15.
  • EIC: Added support for Yuchai.
  • EIC: Added support for Generic CPCB4 +.
  • Added Auto Load Transfer In Manual for Mains as a separate parameter.
  • New Data added over Modbus. 

Changes

  • Interlock of breaker feedback added as an interlock for Contactor latching of Generator and Mains.
  • The breaker on the display now mimics the contractor feedback.
  • Limited Counter Reset removed. The user can now reset any change multiple times with a password.

R15.00

24/04/2024

New feature

• New engine protocol added:
  - Angle
  - Baudouin Wise10B
  - Baudouin Wise15
  - CAT ADEM6
  - Caterpillar ADEM 3
  - Caterpillar ADEM 4
  - Caterpillar ADEM Generic
  - Cummins CM2350
  - Cummins CM2358
  - Cummins CM2850
  - Cummins CM2880
  - Cummins KTA19
  - DDEC III
  - DDEC IV
  - Deutz EMR 2
  - Deutz EMR 3
  - Deutz EMR 4
  - Deutz EMR 5
  - Deutz EMR Stage V
  - Doosan G2 EDC17
  - Doosan MD1
  - Doosan Stage V
  - FPT EDC17
  - FPT Stage V
  - Hatz EDC17
  - Isuzu
  - Iveco CURSOR
  - Iveco EDC7
  - Iveco NEF
  - Iveco Stage V
  - Iveco Vector8
  - JCB
  - JCB 430 448 Stage V
  - Jichai JC15D WEIFU
  - Jichai JC15T JG
  - Jichai JC190
  - Jichai WYS
  - Jing Guan
  - Kohler
  - Kubota stage V
  - MAN
  - MAN EDC17
  - MAN EMC Step 2.0
  - MAN EMC Step 2.5
  - MTU ECU8
  - MTU ECU9
  - MTU J1939
  - Perkins ADEM 3
  - Perkins EDC17C49
  - Perkins Generic
  - Perkins Stage V
  - Perkins Stage V 1204J
  - Perkins StV 1200
  - Perkins StV 400
  - PSI
  - SDEC
  - Steyr EDC17
  - VE E483/E694 CPCB IV
  - Volvo Penta EDC 3 (1500)
  - Volvo Penta EDC 3 (1800)
  - Volvo Penta EDC 4 (1500)
  - Volvo Penta EDC 4 (1800)
  - Volvo Penta EMS 2.3
  - Volvo Penta EMS 2.4
  - Volvo Penta EMS2
  - Volvo Stage V
  - Weichai E6 gas
  - Weichai Gas
  - Weichai Wise10B
  - Weichai Wise15
  - Xichai Gas
  - YANMAR EDC17
  - Yanmar Stage V
  - Yuchai diesel
  - Yuchai gas
  - Yuchai Stage V
  - Yuchai YC-BCR
• Digital input H polarity reversed.
• Data for unavailable sensor is not visible from the EIC view page.
• External EGR support over digital input added.

R14.01

11/12/2023

SGC 120 Mk ll offline firmware initial release. R12.00 was the initial release for the SGC Mk ll variants. All previous releases were over smart flash.

New feature:

• Config and M-Logic flashing in live mode.
• Read event log in live mode.
• Added digital input sources in M-Logic.

 

Changes:

• Updated start sequence to avoid breaker closure before safety monitoring expires.
• Updated the protection configuration range.
• Removed duplicated strings from language pack.

END-USER LICENSE AGREEMENT (“EULA”) FOR DOWNLOADABLE SOFTWARE. (“the SOFTWARE PRODUCT”).

IMPORTANT: PLEASE READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE CONTINUING WITH THIS PROGRAM INSTALL:

 

DEIF A/S End-User License Agreement ("EULA") is a legal agreement between you (either an individual or a single entity) and DEIF A/S for the DEIF A/S software product(s) identified above which may include associated software components, media, printed materials, and "online" or electronic documentation. By installing, copying, or otherwise using the our product, you agree to be bound by the terms of this EULA. This license agreement represents the entire agreement concerning the program between you and DEIF A/S, (referred to as "licenser"), and it supersedes any prior proposal, representation, or understanding between the parties. If you do not agree to the terms of this EULA, do not install or use the SOFTWARE PRODUCT.

The SOFTWARE PRODUCT is protected by copyright laws and international copyright treaties, as well as other intellectual property laws and treaties. DEIF controllers are licensed, not sold.

1. GRANT OF LICENSE.

The SOFTWARE PRODUCT is licensed as follows:

(a) Installation and Use.
DEIF A/S grants you the right to install and use copies of the SOFTWARE PRODUCT on your computer running a validly licensed copy of the operating system for which the SOFTWARE PRODUCT was designed Windows 7, Windows 8, Windows 10.

(b) Backup Copies.
You may also make copies of the SOFTWARE PRODUCT as may be necessary for backup and archival purposes.

2. DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS.

(a) Maintenance of Copyright Notices.
You must not remove or alter any copyright notices on any and all copies of the SOFTWARE PRODUCT.

(b) Prohibition on Reverse Engineering, Decompilation, and Disassembly.
You may not reverse engineer, decompile, or disassemble the SOFTWARE PRODUCT, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation.

(c) Rental.
You may not rent, lease, or lend the SOFTWARE PRODUCT.

(d) Compliance with Applicable Laws.
You must comply with all applicable laws regarding use of the SOFTWARE PRODUCT.

3. TERMINATION

Without prejudice to any other rights, DEIF A/S may terminate this EULA if you fail to comply with the terms and conditions of this EULA. In such event, you must destroy all copies of the SOFTWARE PRODUCT in your possession.

4. COPYRIGHT

All title, including but not limited to copyrights, in and to the SOFTWARE PRODUCT and any copies thereof are owned by DEIF A/S or its suppliers. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE PRODUCT is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content. All rights not expressly granted are reserved by DEIF A/S.

5. NO WARRANTIES

DEIF A/S expressly disclaims any warranty for the SOFTWARE PRODUCT. The SOFTWARE PRODUCT is provided 'As Is' without any express or implied warranty of any kind, including but not limited to any warranties of merchantability, noninfringement, or fitness of a particular purpose. DEIF A/S does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the SOFTWARE PRODUCT. DEIF A/S makes no warranties respecting any harm that may be caused by the transmission of a computer virus, worm, time bomb, logic bomb, or other such computer program. DEIF A/S further expressly disclaims any warranty or representation to Authorized Users or to any third party.

6. LIMITATION OF LIABILITY

In no event shall DEIF A/S be liable for any damages (including, without limitation, lost profits, business interruption, or lost information) rising out of 'Authorized Users' use of or inability to use the SOFTWARE PRODUCT, even if DEIF A/S has been advised of the possibility of such damages. In no event will DEIF A/S be liable for loss of data or for indirect, special, incidental, consequential (including lost profit), or other damages based in contract, tort or otherwise. DEIF A/S shall have no liability with respect to the content of the SOFTWARE PRODUCT or any part thereof, including but not limited to errors or omissions contained therein, libel, infringements of rights of publicity, privacy, trademark rights, business interruption, personal injury, loss of privacy, moral rights or the disclosure of confidential information.