TDU 107 Core

1.3.7.0

31/05/2021

New features:

• Support for OEM product IDs in AGC-4 Mk II is added.
• Scania EMS S8 support is added..
• Block mode button is added.
• Master/slave controller manual switch is added.

Changes:

• "AUS" mode for German option V0108 in "Auto" and "Test" mode is added.

Corrections:

• Alarms are removed from the header when alarm conditions disappear.
• Fixed an issue with missing genset modes in the language file.
• Fixed that the genset mode would change if the password level was set to service or master.

1.3.6.0

23/03/2021

New features:

• Added support for OEM product IDs in AGC-4 Mk II.
• Extra safety pop up (Nominal setting + Plant mode).
• Translation file added with "TDU specific texts".
• "UpdatePackage.zip" includes software version.
• Support updatepackage.zip with lower case characters.

1.3.5.0

29/01/2021

New features:

• Added support for AGC-4 Mk II
• Added Customer branding

1.3.4.0

07/12/2020

Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

Corrections:

• Customer branding is added.
• Fixed the missing alarm texts for EIC alarms.
• Fixed the screen lock on the Log page, when updating logs from an empty list.

1-3-3-0

10/09/2020

Supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

New features:

•    Further brandings are added.
•    AGC-4 as clock master is added.

Changes:

•    New entry point for the ECU measurement window is added.

Corrections:

•    Parameter max. value was not taken into account for text values.
•    If exactly 9 alarms was present, the last one was not visible.
•    Possibility to include system information when exporting a TDU.config file is added.
•    Generator measurements are removed from mains TDU.
•    Regeneration parameters are added to TDU.
•    Application supervision now supports mains with ID 1-16 and DG´s with ID 17-32.

1.3.1.0

19/02/2020

Supported on AGC-4 DG & AGC-4 Mains.
AGC-4 SW required: 4.76.1.

New features:

•    Control panel instruments can now be custom scaled by pressing and holding 3 seconds.
•    All voltage selections in parameter 9030 are now supported.
•    Access lock is implemented, when the input are configured.
•    New screen is added with current measurements shown graphically.
•    M-Logic command "Inhibit. mode button" is now reflected in TDU.
•    It is now possible to add a separate password for control panel instruments under "Permissions".
•    Fuel level is now shown in the top bar, if parameter 10980, 10990 or 11000 is set to "RMI fuel level" via the utility software.
•    Running hours is now shown in the top bar, if connected to a genset controller.
•    Parameter shortcut is added on the control page; it can be enabled/disabled under "Display settings".
•    Power Management ID and priority are added to the control panel, when connected to a genset controller.
•    Auto Jump to Synchroscope page is added; it can be enabled/disabled under "Display settings".
•    Import/Export: It is now possible to load a configuration file from an older software version.

Changes:

•    20 pages are now available in the instrument panels on the control page.
•    Lists of instrument measurements have been expanded.
•    User access level filtering on the parameter page have been removed.
•    DM1/DM2 texts have been expanded.
•    When connected to a German AGC-4 with V0108 option, the manual button is removed.

Corrections:

•    Language management create export has been corrected, when specific German charecters are used in the controller translation.
•    Visibility of the DM1 top icon has been corrected.

1.3.0.1

23/09/2019

Only supported on AGC-4 DG & AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.

Corrections:

• Corrected: AOP shortcut on control panel page.
• When changing mode, the confirmation dialogue now always pops up.

1.3.0.0

12/09/2019

Supports AGC-4 DG & AGC-4 Mains controllers.
Minimum AGC-4 SW required: 4.74.3.

New features:

• Support of AGC-4 mains controller.

• Import/export of following settings via USB:
          - Meters on homepage
          - Password levels
          - AOP texts
          - All settings under "Display config" 
• Added "Connection to controller" text on start-up screen.

Changes:

•    TDU backlight timeout introduced.
•    Fixed sporadic communication timeout messages on TDU.
•    Extended number of status texts on the TDU.

Corrections:

• Fixed screensaver freeze issue.
• Corrections to some status texts.
• Fixed rare initial communication issues.
• Create new master language function corrected

1.2.2.0

19/06/2019

Only supported on AGC-4 DG.
Minimum AGC-4 SW required: 4.72.0.

New features:

• Implementation of offline USB update of TDU
• Added scrolling on supervision page
• Added hardcoded master password to DM1/DM2 clear button
• Enhanced user feedback during restart of TDU
• Added new EasyConnect text: "DG Ready to be added"

Changes:

• Improved connection stability between TDU and AGC-4 controller
• Change scaling of Fuel rate measurement
• Internal production handling updated.

Corrections:

• Correct Modbus offset for escape mode timer
• Improved stability of auto connect feature
• Added missing password prompt to AOP shortcut on home screen
• Fixed misplaced buttons in control panel

1-3-3-1

Supported on AGC-4 DG and AGC-4 Mains.
Minimum AGC-4 SW required: 4.74.3.
Recommended minimum AGC-4 SW: 4.76.1.

Changes:

• Extended search for renamed software packages is added. This means that for releases after 1.3.3.1 the TDU software package will include the version number. 

Corrections:

• Fixed connection problems in firmware ver. 1.3.3.0.
• Fixed DVC types on the parameter page.
• Fixed problems with parameter scaling and drop-down elements on the parameter page and in the USW dialogue.